A Guide to Transform Old Axe into the Best Backing Axe Anytime

backpacking axe

A sharp and might axe is a dream of every wood cutting person. Using a dull and rusty axe can be dangerous and might even result in some injuries as well. Having a deep knowledge about the sharpening process is as important as that of tree cutting. Sharpening an axe can be a dreary task to do but, the best backing axe demands a few efforts, time, and carefulness. This is the only way you can make your cutting go like smooth like butter. So, hold your tools and start honing now!

By following every axe sharpening steps before using it, you can make any old axe looks like new, every time.

Get Started With Axe Sharpening Step-By-Step

Axe sharpening is easy to do all you need to do is just get ready with your tools and see how to sharpen an axe with a stone is accomplished.

1. Brighten Up the Dull Axe

Cleaning and brightening the axe before starting the rubbing is necessary. The process of brightening includes as follows:

Safety Comes First

Your safety is in your hands. Protect your hands with the thick and strong gloves that can protect you from injury and cuts. Of course, nobody likes to hurt their eyes, so, it’s recommended to wear safety goggles as well. In addition, if you are using power tools a dust mask or a respirator can be used for the safety purpose as well.

Cleaning the Best backing axe

All about Best backing axe safety

Some Cleaning

It is essential to clean the axe as a clean axe can prevent many accidents also, a steel wool is the best choice for this purpose. Polishing is vital and in order to do this, you can use silicon carbide sandpaper or coarse-grit aluminum oxide, to sand the axe. To start the polishing, rub the axe from the hammer end to the blade. For better results, rub the axe a metal polish is ideal to give a final change as well.

After, completing the polishing process, don’t forget to clamp the axe. It can be done both horizontally and vertically by adjusting the angles of the axe.

Which Bastard can file?

Choosing a bastard file plays an important role in sharpening the axe. Normally, a bastard mill file, which is twenty-five to thirty centimeters long, has coarse, slightly tempered, and single-cut is the best choice. Next, clean the clogged teeth if the file is old and if it’s new rub a chalk on it. Now inspect every angle the axe, which can be twenty-thirty digress broader suitable for frozen or hardwood.

File Steadily

Now, here comes the time to file the axe. So, put your hand on the axe to prevent the rocking and shaking and start filing along with that fan-shaped area too. When you feel the intonation switch to the other side as your work is done for that side.

2. Sharpen up the Axe

Lastly, sharpen your axe with stone and to do so, go with the following steps here:

Whetstone Makes the Edges Sharp

To make the blade sharp, you need- a rough whetstone and the oil (honing or sewing machine). Apply oil to the extreme edge and start rubbing the stone in a circular motion. Rub on both sides, until the burr is totally gone. You can track the shape of the featheredge or bent end by running your finger over the edge. This is how you sharpen an axe with a stone in no time.

Get Done With the Honing

Now the last step is to remove the featheredge and to accomplish this repeat the sharpening process but this time with a finer whetstone. If the edges are not shiny, don’t worry, the sharpened edge of the best backing axe do not reflect the light.

Cutting the best backing axe

Sharpened edge of the best backing axe

Repeat the honing every time before using the axe, which gives more life to it and the cutting will be smooth.

Conclusion

This process of sharpening the edge is easy and makes the axe more durable. So, whenever there is a call for wood cutting, don’t forget to sharpen your axe with these handy steps.

Add Comment

Required fields are marked *. Your email address will not be published.